All ECCO Line machines are equipped with 28 t punching pressure (40 t on request) and Trumpf Tooling system.
All models are equipped with:
- Constant punching pressure
- Maintenance free hydraulic drive
- One stripper holder and plate
- Two different stroke lengths
The ECCO Line earns money with:
- Small and medium series
- Single pieces and prototypes
Tooling system
The worldwide approved Trumpf tooling system is used on the ECCO Line (other systems on request, e.g. Amada, Rainer, and XX28). The tool is put directly into the tool holder without an intermediate case. Through the large propagation of the Trumpf tooling, the machine is virtually always ready for operation.
7 seconds. The largest tool diameter is 105 mm (4"). Besides a wide range of standard tools, it is possible to manufacture arbitrary tool within the range of 105 mm diameter. The metal loss from sharpening will be compensated through changes of the punch stroke length. Exact alignment of cutting tools with riding clamping ensures long tool life. It also enables the use of angled Whisper-Tools which can achieve a noise reduction of up to 50%.
Technical Data
|
Working Area
|
EL 300 x 500 370 x 700
EL 500 x 1000 570 x 1200
EL 750 x 1500 820 x 1700
|
|
Performance
|
Max. sheet thickness 12,7 mm
Max. hydraulic punching pressure 280 kN / 400 kN Speeds
Max. stroke rate 100 strokes / min
|
|
Tooling
|
Trumpf ® style tools
Max. punching diameter Ø 105 mm or any shape fitting
within 105 mm / 74 mm
Optional 92 x 92 mm
Tool change time 15 sec. manual
|
|
Accuracy of Punching
|
With standard measuring scales + - 0,2 mm
With digital readout + - 0,1 mm
|
|
Space requirement and weights
|
EL 300 1520 x 940 x 1540 mm weight 1800 kg
EL 500 2400 x 1580 x 1540 mm weight 2500 kg
EL 750 3400 x 1580 x 1600 mm weight 3400 kg
Electrical Values 28 / 40 T. Electrical connection value 5 / 8 kVA
Hydraulic motor 4,0 / 5,5 kW
Required fuse 3 x 16 A / 3 x 16 A
Hydraulic oil 50 / 115 liter
|